Frequently Asked Questions

Have a question that’s not on here?

Shoot us an email:

EMAIL

  • Fits all Harley-Davidson Touring model from 1997 to 2024

  • The system will bolt on but you should double check for clearance around the pipe on initial assembly. There is a tighter clearance that may cause wear issues.

  • Yes, we make a specialty length legs to accommodate the suspension travel. If you are running their air compressor under the oil pan, you will need to relocate it.

  • Cruise over to the centerstand page, put in your bike info, and the image will adjust to your correct model. Compare your stand to the stand shown and if it does not match, shoot us a call.

  • The legs are a precision fit to the shaft and should have no lateral movement. If your end bolts are properly torqued, remove legs and check for wear.

  • From our 100% American Aluminium and Steel to our top tier actuators, we have a guaranteed quality you can trust. All centerstands are manufactured and assembled by experts at our HQ in Phoenix, AZ.

  • We offer a 1 year warranty on electric actuator issues. Structural issues are case dependent and we will work our hardest to get you back on the road.

  • We pride ourselves on the ease of installation and offer ample information on our video installation page. That being said, If you do not feel like you're the proper person to install the system, it never hurts to have your local trusted shop button it up for you.

  • By leaving the legs down you run the risk of hitting them on uneven road surfaces and potential bending or breaking your center stand.

  • Most likely your legs are on backwards.

  • Most likely your legs are on backwards. If they are mounted correctly, make sure your legs are touching the ground, before all the air is out of your system. You should have a ¼” to ½” remaining after your legs touch the ground.

  • We recommend first checking for any obstructions in the leg movement path. If the leg path is clear, proceed to checking the movement path of the actuator. If both are clear, refer to our Shaft Fitment Video to check for binding of the legshaft.

  • Checkout our diagnosis video and run through our step by step process to assess your center stand. If you cannot find a solution, feel free to shoot us a call!